Structure of cooling tower 1. wgfb non-packing spray cooling tower adopts high-efficiency and low-pressure centrifugal atomization device (nozzle pressure: 0.035mpa) as cooling element, which replaces the packing and water distribution device of traditional packed tower, making the whole tower almost an empty tower and greatly simplifying the structure. 2. In wgfb no-packing spray cooling tower, after the packing and water distribution devices are cancelled, the atomizing device is installed above the air inlet duct, and the spraying direction of water is the same as the cold air sucked by the axial fan. At the same time, water has two processes: rising and falling, and cooling also has two processes: downstream cooling and countercurrent cooling. 3. gfn packing-free spray cooling tower sprays water into a mist by an atomizing device, so that the tiny particles of air and water are in uniform contact, 而填料塔通過水分配噴嘴將水分配到填料上，以薄膜形式接觸冷空氣。
冷卻塔噴嘴:DC噴嘴、反光噴嘴、花蘭噴嘴、冷卻塔噴嘴、均勻飛濺噴嘴、多層噴嘴、tp11噴嘴、哈蒙噴嘴、xpz噴嘴、電廠專用冷卻塔噴嘴、xph噴嘴、耙式噴嘴、三盤冷卻塔噴嘴、填料塔噴嘴、噴霧噴嘴和方形塔噴嘴。
