壓力機 鍛壓沖床 沖床模具 合力沖床

品牌/型號：峰偉數控/TPD-600T

主電機功率：30（kw）kn

適用行業：通用

適用范圍：通用

布局形式：立式

品牌：峰偉數控

產品類型：全新

滑塊行程：400（mm）mm

模柄孔尺寸：0（φmm*mm）

動力類型：氣動

喉口深度：1500（mm）mm

作用對象材質：金屬

公稱壓力：6000（kn）KN

行程次數：10-20

類型：普通沖床

是否庫存：是

控制形式：人工

型號：TPD-600T

一．結構Structure

1.高強度、高精密的機架，采用鋼板焊接及消失模HT250鑄鐵2種，并經退火處理，消除床身內應力，增加機身韌性及強度。

High strength, high precision of the rack, is welded by steel plate and EPC cast iron2HT250, and after annealing treatment to eliminate internal stress, bed, increase the toughness and strength.

2.結構件負荷均勻，剛性平衡。

Pieces of the structure of uniform load, rigidity balance.

3.傳動中心與機器整體的中心趨于一致，確保沖壓的精確、穩定。

Transmission center and the whole machine centers tend to be consistent, ensure the stamping precision, stable.

二．安全Safety

1. 峰偉數控所有機器都配備了先進的干式剎車離合器，再加上精確敏銳的雙聯電磁閥能在最大限度內縮短剎車時間。另外，剎車輔助系統二度落裝置在突發事件中，當檢測到剎車剎不住時，會再次提供剎車信號，以再次提供剎車信號，以提供足夠動力保證及時準確剎車。

Fengwei cnc all machines are equipped with advanced dry braking clutch, coupled with precise sharp double solenoid valve can in maximum shortening braking time. In addition, brake assist system two degree drop device in the event of an emergency, when detecting the brake does not live, will again provide the brake signal, to once again provide the brake signal, in order to provide sufficient power to ensure timely and accurate brake.

2. 最高程度的保護使用者是我們的最大目標。因此，雙手操作按鈕之間以及與機身之間都留出足夠空間，以保護人手的安全，同時，在系統設計中規定了雙手同時操作才能起動，以確保以免誤操作造成的人身傷害。光電保護裝置或者防護網的加裝都進一步提高了對使用者的保護。

The highest degree of protection of users is our greatest goal. Therefore, the hands operation button and between the fuselage and leave enough space between, in order to protect the people 's safety, at the same time, in the system design are provided in both hands simultaneous operation to start, in order to ensure to avoid misoperation caused personal injury. Photoelectric protection device or a protective net which can further improve the protection to users.

3. 峰偉數控都標準配置了進口的過負載裝置以保護沖床由于過載沖壓，造成模具的變形損壞，同時，還可以加裝誤送檢測裝置可配合自動沖壓模具裝置，以更好的保護模具。

Fengwei cnc are standard configuration of the imported over load device to protect the punch due to overload caused by stamping, mold damage, at the same time, can also be added to fault detection device can be matched with automatic punching die device, in order to better protect the mold.

三．精度高High precision

1.精密度高達0.05mm，生產更具安全、穩定和效率。

High precision of 0.05mm, the production of more safety, stability and efficiency.

2.所有的零部件（含機身、曲軸、滑塊等）都經過各類不同的工藝處理，如去應力等，以保證產品精度的穩定。

All of the parts (including the fuselage, crank, slider ) through various processes, such as stress, to ensure product accuracy and stability.

3. 所有材料都是同類產品中最高級別的材料，以確保機器的穩定性和精密度。

All materials are similar products in the highest levels of material, to ensure the stability of machine and precision.

四、加工自動化Process automation

可搭配任何的自動送料機構，設定好各參數，配置好相關感應后，一人可以管理5-8臺機器，進行自動化生產、降低成本，提高效率。

Can match any of the automatic feeding mechanism, setting the parameters, configuration related to induction, one person can manage5-8 machines, automatic production, reduce costs, improve efficiency.

五、環保Environmental protection

外形美觀，低噪音、低消耗、節省能源，流暢簡潔的外觀更能體現出先進的設計理念。

Beautiful appearance, low noise, low consumption, energy saving, smooth and neat appearance to reflect more advanced design concepts.

參數Parameter