品牌：ZOER
型號：ZRW-55824
類型：油氣兩相分離器
作用原理：其他
用途：其他
安裝形式：其他
結構形式：其他
應用領域：制冷
材質：鋼材
產品簡介??Product Introduction
??????? 壓縮機在運轉中,壓縮機排氣出口冷媒通常含有大量的冷凍機油，為了保證壓縮機不致流失大量冷凍機油，及防止冷凍機油隨著冷媒流向系統中影響冷凝器散發熱功能，及蒸發器的制冷效果，所以在壓縮機和冷凝器之間必須裝一臺油分離器，使冷凍機油和冷媒分離，讓油自動回入壓縮機曲軸箱內?；赜脱b置是以油分離器內底部的浮球閥操作，再由高低壓差原理一起完成。保證壓縮機不缺油，以達到最好的制冷效果。
??????? When compressor is in operation, the outlet of compressor always has lots of refrigerant oil. We need to install an oil separator between compressor and condenser to separate the refrigerant oil and refrigerants in order to prevent the compressor not lose too much refrigerant oil and prevent the refrigerant oil flow to system with refrigerants to interfere the condenser’s heat function and evaporator cooling function. Then the oil will flow back to the compressor crankcase. Oil-return device operates on the ball valve moving on the bottom of oil separator and the high-low voltage theory. The oil separator can ensure the sufficiency of oil in compressor and let the compressor reach its best cooling performance.
產品展示? Product Display
產品特點??Product Fedture
●可靠的針形閥關閉系統
Reliable needle valve closing system
●帶有鋼制回油系統的密封結構(1/ 4"或3/ 8"螺口)
Steel oil return system with hermetic welded construction (1/4''or3/8''SAE connectors)
●減小系統高壓端的振動和噪聲】
?Can reduce the vibration and noise of system high pressure end
產品屬性? Product Attribute
產品說明 Specifications | ||||
● 儲油量：55824-559011為600ml，56909-569417為800ml Oil volume 55824-559011:600ml, 56909-569417:800ml ●在安裝油分離器之前，需先對油分離器進行初始充油，從而保證系統正常運行 We need to pre-charge the oil before installing oil separator. To ensure the normal operation system | ||||
命名方式 | 例如 ZRW-55824 | |||
| Nomenclature:For Example ZRW-55824 | ||||
| ZR | W | 5582 | 4 | |
Series | Welded | Model Number | Connection Size （in1/2" ） | |
尺寸數據 | Dimensional Data | |||
型號 Description | 接管尺寸(in)Connection Size (ODF) | 外形尺寸（mm）Dimensions | 對應型號Corresponding Description | |
| A | B | |||
ZRW-55824 | 1/2 | 102 | 274 | ZRW5201 |
